Price:
$6.68

Free Shipping

Description

Programming instructions:
a) electrically connect the cable to the tone BEC programmer connecting direction according to the direction illustrated above color (black ground right border).
b) connecting the electrical power transfer and the power switch (120A 8OA and should hold by pressing the ESC key).
c) When the programmer programming the green LED blinks twice the steady harmonic represents an electrical connection is successful programming. When the program in the secondary LED off when the programmer ESC current programming parameters read out and displayed in the corresponding LED in the corresponding item. Otherwise, the connection fails.
d) pressing down the button can be selected on the programming in a different programming project, select the item corresponding to the current LED will turn on, it indicates the currently selected item.
e) selecting the contents of the current to be set by the currently selected item in the right key on the programmer, the LED on the content selection lit.
f) repeating operations d and e are selected to be set up all the contents.
g) to the above contents will be programmed programming buttons provided on the programmer to the above electrical transfer. To begin programming, programming at the LED lights up, at greater than 5S Off indicates successful programming. Otherwise program fail (the new program after power is turned off).
h) Press the button on the factory programmer indicates to the ESC to restore the factory default settings. To begin programming, programming at the LED lights up, at greater than 5S Off indicates successful programming. Otherwise program fail (the new program after power is turned off).
1: low-voltage detection sequentially 3.1V, 2.9V, 2.7V, is not detected.
2: turn ordinary startup mode, soft, strengthened.
3: The maximum braking force in sequence (25A, 45A, 60A) 50%, 25%, 75%, 100% (default 50%).
   (80A, 120A) 25%, 50%, 75%, 100% (default 25%).
4: Maximum reversing efforts to turn 25%, 50%, 75%, 100%.
5: the width of the center point of order 9%, 6%, 12%.
6: BEC cable connection according to the color direction.
7: 1 to 5 above, the ESC red depot default settings.

Specification

General

Type: Program Card

Dimensions and Weight

Product weight: 0.0300 kg
Package weight: 0.0450 kg
Product size (L x W x H): 4.00 x 3.00 x 0.50 cm / 1.57 x 1.18 x 0.2 inches
Package size (L x W x H): 7.00 x 7.00 x 5.00 cm / 2.76 x 2.76 x 1.97 inches

Package Contents

Package Contents: 1 x LED Programming Card

Specification

General

Type: Program Card

Dimensions and Weight

Product weight: 0.0300 kg
Package weight: 0.0450 kg
Product size (L x W x H): 4.00 x 3.00 x 0.50 cm / 1.57 x 1.18 x 0.2 inches
Package size (L x W x H): 7.00 x 7.00 x 5.00 cm / 2.76 x 2.76 x 1.97 inches

Package Contents

Package Contents: 1 x LED Programming Card

Leave a Comment